Unipower G & GB

At the heart of the G-Series burner’s efficiency is an innovative new design featuring an exclusive flame retention plate, precision engineered to thoroughly mix fuel gas and combustion air for unexcelled combustion efficiency. The flame retention plate creates a tight ring of flame which eliminates the danger of blow-off or flash-back.

The low-maintenance spark ignited pilot works under the most adverse conditions making it ideally suited for more difficult applications such as downdraft boiler, furnaces, ceiling suspended furnaces and units with severe space restrictions.

The quiet, high-speed blowers provide the precise amount of combustion air necessary for efficient combustion. In conjunction with the burner to provide a steady, efficient flame regardless of natural draft conditions.

All Unipower G-Series burners are equipped with the state of the art electronic microprocessor based flame safeguard system employing flame rectification for flame detection. A completely safe start check and run control sequence is provided with instantaneous response and shut down on loss of flame.

Unipower GB-Series burners are equipped with a 24 volt electronic flame safeguard system employing the flame rectification for flame detection. The GB-Series uses 24 volt valves and controls which are smaller than 120 volt controls but will allow use of the 120 volt operating controls if needed.

Each Unipower G-Series burner is shipped completely assembled and is fire-tested at the factory to assure reliable operation. The Unipower G-Series burner is listed with Underwriters Laboratories in the United States and Canada.